IFO is IDLE in ENGINEERING

The LVEA has just been transitioned to LASER HAZARD following the venting of the Relay Tube.

Vent work continues with the following progress:

• LVEA Laser Hazard Transition - DONE
• HAM1 - Set irises on table to capture PSL beam pointing - ONGOING
• HAM1 - Go into PSL and add lenses -AFTERNOON
• HAM7 - Start deinstall relay tube, install viewport adapter on HAM5 side - AFTERNOON
• HAM7 - In-chamber OPO work continued - AFTERNOON
• HAM1 - Load in/stage all JAC hardware, plug in JM1 and JM3 to start testing controls - AFTERNOON
• HAM1 - Install periscopes - ONGOING
• BSC2 - FARO work - ONGOING

Other:

• DAQ Restart 10:18 PT to 10:57 PT
• There is a vacuum pump running near HAM7 reni
• Craning work in north bay LVEA
• Jeff and Oli working on SUS models

Ryan S will take over ops shift for the next few hours.