I set up medm screens for JAC ASC and LSC located at /opt/rtcds/userapps/release/ioo/common/medm.

The structure is sitemap > IOO > JAC Overview for the main screen.

The WFS control is at  sitemap > IOO > JAC Overview > JAC ASC.

The length control filters are in sitemap > IOO > JAC Overview > L_SERVO.

I have also included links to the DC QPD alignment screens for JAC-WFS_A and B, and the JAC-REFL_A PD used for length sensing.

The screen also contains links to the screens for the JAC-TRANS_A PD, in-air picomotors, JM1 tip-tilt, PSL periscope PZT, JAC Heater and JAC PZT.

These latter readouts are all from ethercat.

We still need some kind of readout for the in-air trigger PD and a guardian script for control.

In the meantime I am working on changes to the IMC WFS medm screens for when we have JAC installed as we will need to use the new JM3 tip-tilt for feedback instead of the PSL periscope PZT.

This trial screen is saved as /opt/rtcds/userapps/release/ioo/common/medm/IMC_WFS_MASTER_JAC.adl.